| | |
 | Armature Overhaul (510)
Stock Number 510 - includes bobbin rewind,new condenser and earth brush track skimmed if worn. Sliprings if required are extra. This is not an exchange service, you get your own armature back. Jobs are usually completed within six weeks, and carry a two year warrantee. Send carefully wrapped and include payment and return address details.Sorry, this service is currently unavailable
Price: £85.00 (Excluding: VAT at 17.5%) |
|
|
Bobbin Only Rewind (511)
Stock Number 511 - If you have the facilities to strip and reassemble the armature this provides a lower cost alternative to full armature overhaul. This is not an exchange service, you get your own bobbin back. Jobs are usually completed within six weeks, and carry a two year warrantee. Send carefully wrapped and include payment and return address details.Sorry, this service is currently unavailable.
Price: £68.00 (Excluding: VAT at 17.5%) |  |
|
|
 | Contact Breaker Points Set (71)
Stock Number 71 - Original Part Number 484098 - Reproduction - Tungsten.
Price: £9.95 (Excluding: VAT at 17.5%) |
|
|
CB Points Centre Screw (1011)
Stock Number 1011 - Original Part Number 110730 - Reproduction.
Price: £2.10 (Excluding: VAT at 17.5%) |  |
|
|
 | Contact Breaker Assembly Complete (72)
Stock Number 72 - Original Part Number 460051 - Reproduction.
Price: £44.20 (Excluding: VAT at 17.5%) |
|
|
CB Assembly Centre Screw Tab Washer (657)
Stock Number 657 - Original Part Number 460052 - Reproduction.
Price: £1.05 (Excluding: VAT at 17.5%) |  |
|
|
 | CB Points Tappet (89)
Stock Number 89 - Original Part Number 464092 - Reproduction.
Price: £1.70 (Excluding: VAT at 17.5%) |
|
|
Condenser (985)
Stock Number 985 - Original Part Number 454415 - Modern substitute, very high specification, zero failure - Comes with full fitting instructions.
Price: £12.45 (Excluding: VAT at 17.5%) |  |
|
|
 | Slipring (single cylinder) (75)
Stock Number 75 - Original Part Number 454496 - Reproduction.
Price: £16.00 (Excluding: VAT at 17.5%) |
|
|
Oil Thrower (891)
Stock Number 891 - Original Part Number 463944 - Reproduction.
Price: £7.50 (Excluding: VAT at 17.5%) |  |
|
|
 | Pick-up (73)
Stock Number 73 - Original Part Number 463066 - Reproduction - includes carbon brush and spring, split washer and cable nut.
Price: £8.55 (Excluding: VAT at 17.5%) |
|
|
Carbon Brush & Spring (47)
Stock Number 47 - Original Part Number 451260 - Fits Pick-up stock number 73, 5mm diameter.
Price: £2.60 (Excluding: VAT at 17.5%) |  |
|
|
 | Pick-up Retaining Screw (670)
Stock Number 670 - Reproduction - Zinc plated.
Price: £1.70 (Excluding: VAT at 17.5%) |
|
|
Earth Brush Holder (74)
Stock Number 74 - Original Part Number 455191 - Reproduction - Head diameter 0.37" - Brush & spring and washer are not included.
Price: £7.40 (Excluding: VAT at 17.5%) |  |
|
|
| | Earth Brush and Spring (47)
Stock Number 47 - Original Part Number 455190 - Fits Holder stock number 74, 5mm diameter, may need to be shortened.
Price: £2.60 (Excluding: VAT at 17.5%) |
|
|
Oil Seal (783)
Stock Number 783 - Original Part Number 458375 - Reproduction.
Price: £5.40 (Excluding: VAT at 17.5%) |  |
|
|
 | Control Parts Set (88)
Stock Number 88 - Original Part Number 458728 - Reproduction - Includes Spring, Plunger, Threaded Tube and Rubber Boot.
Price: £13.20 (Excluding: VAT at 17.5%) |
|
|
Control Cable (86)
Stock Number 86 - Reproduction - Cable outer 41" long.
Price: £13.60 (Excluding: VAT at 17.5%) |  |
|
|
 | Control Lever (940)
Stock Number 940 - Reproduction - Lefthand - 7/8" diameter handlebar.
Price: £10.25 (Excluding: VAT at 17.5%) |
|
|
Magneto Bearing E15 (27)
Stock Number 27 - Original Part Number 189291 - New - Size 15mm x 35mm x 8mm - fitted to both drive and CB end.
Price: £14.75 (Excluding: VAT at 17.5%) |  |
|
|
 | Bearing Insulating Cups
Stock Number 29 - For E15 Bearing - 0.010" thickStock Number 812 - For E15 Bearing - 0.013" thick
Price: £0.50 (Excluding: VAT at 17.5%) |
Size: Stock Number 29 Stock Number 812 |