| | |
 | CB Points Spring (90)
Stock Number 90 - Original Part Number 470688 - Reproduction - Fitted in pairs to brass base plate type CB assy.
Price: £4.50 (Excluding: VAT at 17.5%) |
|
|
 | CB Points Centre Screw (875)
Stock Number 875 - Original Part Number 4922856 - Reproduction - Use with late type low inertia CB assembly.
Price: £4.35 (Excluding: VAT at 17.5%) |
|
|
 | CB Points Centre Screw (656)
Stock Number 656 - Original Part Number 122160 - Reproduction - 45mm long - Use with earlier type brass base CB assembly.
Price: £2.95 (Excluding: VAT at 17.5%) |
|
|
 | Condenser (985)
Stock Number 985 - Original Part Number 454415 - Modern substitute, very high specification, zero failure - Comes with full fitting instructions.
Price: £15.45 (Excluding: VAT at 17.5%) |
|
|
 | Earth Brush Holder (74)
Stock Number 74 - Original Part Number 455191 - Reproduction - Brass - Brush & spring and washer are included.
Price: £9.85 (Excluding: VAT at 17.5%) |
|
|
 | Earth Brush & Spring (47)
Stock Number 47 - Original Part Number 455190 - 5mm diameter, may need to be shortened.
Price: £2.65 (Excluding: VAT at 17.5%) |
|
|
 | Washer for Earth Brush Holder (389)
Stock Number 389 - Reproduction - Red fibre.
Price: £0.20 (Excluding: VAT at 17.5%) |
|
|
 | Slipring (single cylinder) (75)
Stock Number 75 - Original Part Number 454496 - Reproduction
Price: £16.50 (Excluding: VAT at 17.5%) |
|
|
 | Slipring (twin cylinder CW) (97)
Stock Number 97 - Original Part Number 454497 - Reproduction - Clockwise from drive end of magneto.
Price: £16.50 (Excluding: VAT at 17.5%) |
|
|
 | Slipring (twin cylinder ACW) (98)
Stock Number 98 - Original Part Number 455361 - Reproduction - Anti-clockwise from drive end of magneto.
Price: £16.50 (Excluding: VAT at 17.5%) |
|
|
 | Safety Spark Gap Screw (100)
Stock Number 100 - Own Make
Price: £4.40 (Excluding: VAT at 17.5%) |
|
|
 | Pick-up RH (spring clip retained) (101)
Stock Number 101 - Original Part Number 458367 - Reproduction - Right hand side when viewed from drive end - Includes carbon brush and spring, split washer and cable nut.
Price: £9.35 (Excluding: VAT at 17.5%) |
|
|
 | Pick-up LH (spring clip retained) (102)
Stock Number 102 - Original Part Number 458368 - Reproduction - Left hand side when viewed from drive end - Includes carbon brush and spring, split washer and cable nut.
Price: £9.35 (Excluding: VAT at 17.5%) |
|
|
 | Washer Seating (103)
Stock Number 103 - Original Part Number 458346 - Reproduction - for clip retained pick-up.
Price: £1.15 (Excluding: VAT at 17.5%) |
|
|
 | Pick-up Retaining Clip (659)
Stock Number 659 - Original Part Number 458370 - Reproduction - Stainless steel.
Price: £7.65 (Excluding: VAT at 17.5%) |
|
|
 | Pick-up (competition) (104)
Stock Number 104 - Original Part Number 458876 - Reproduction - Includes carbon brush and spring, split washer and cable nut.
Price: £8.80 (Excluding: VAT at 17.5%) |
|
|
 | Washer Seating (competition pick-up) (105)
Stock Number 105 - Original Part Number 455622 - Reproduction - for competition pick-up.
Price: £0.75 (Excluding: VAT at 17.5%) |
|
|
 | Pick-up Retaining Screw (competition) (671)
Stock Number 671 - Reproduction - Zinc Plated.
Price: £2.05 (Excluding: VAT at 17.5%) |
|
|
 | Pick-up (single cylinder) (106)
Stock Number 106 - Original Part Number 456794 - Reproduction - Includes carbon brush and spring, split washer and cable nut.
Price: £9.05 (Excluding: VAT at 17.5%) |
|
|
 | Washer Seating (648)
Stock Number 648 - Original Part Number 455622 - Reproduction - use with single cylinder pick-up.
Price: £0.85 (Excluding: VAT at 17.5%) |
|
|
 | Pick-up Retaining Screw (670)
Stock Number 670 - Reproduction - Stainless steel.
Price: £1.75 (Excluding: VAT at 17.5%) |
|
|
 | Pick-up 45 degrees LH (1008)
Stock Number 1008 - Original Part Number 458886 - Pick-up 45 degree left hand - Reproduction - Includes carbon brush and spring, split washer and cable nut.
Price: £9.95 (Excluding: VAT at 17.5%) |
|
|
 | Pick-up 45 degrees RH (1007)
Stock number 1007 - Original Part Number 458865 - Pick-up 45 degrees right hand - Reproduction - Includes carbon brush and spring, split washer and cable nut.
Price: £9.95 (Excluding: VAT at 17.5%) |
|
|
 | Contact Breaker Cover (108)
Stock Number 108 - Original Part Number 459269 - Reproduction - Screw on with baffle and engine stop connection. Includes sealing ring and carbon brush and spring.
Price: £32.75 (Excluding: VAT at 17.5%) |
|
|
 | Baffle End Cap (112)
Stock Number 112 - Original Part Number 459266 - Reproduction - Fits CB Cover stock number 108.
Price: £6.20 (Excluding: VAT at 17.5%) |
|
|
 | Contact Breaker Cover (781)
Stock Number 781 - Original Part Number 459199 - Reproduction - Screw on with breather cap. Includes sealing ring.
Price: £38.05 (Excluding: VAT at 17.5%) |
|
|
 | Contact Breaker Cover (782)
Stock Number 782 - Original Part Number 459205 - Reproduction - Screw on with breather and engine stop connection. Includes sealing ring and carbon brush and spring.
Price: £40.65 (Excluding: VAT at 17.5%) |
|
|
 | Breather Cap (113)
Stock Number 113 - Original Part Number 459194 - Reproduction - Fits CB Cover stock number 781 and 782.
Price: £14.15 (Excluding: VAT at 17.5%) |
|
|
 | Clip for Screw On Covers (865)
Stock Number 865 - Original Part Number 458813 - Reproduction - Retains CB Covers stock numbers 781, 782 and 108 Includes hammer drive screws.
Price: £4.75 (Excluding: VAT at 17.5%) |
|
|
 | Contact Breaker Cover (109)
Stock Number 109 - Original Part Number 458619 - Reproduction - Incorporates engine stop and includes split washer and cable nut.
Price: £16.35 (Excluding: VAT at 17.5%) |
|
|
 | Contact Breaker Cover (111)
Stock Number 111 - Original Part Number 458647 - Reproduction - Plain Dome - K1F fitted to Velo.
Price: £6.20 (Excluding: VAT at 17.5%) |
|
|
 | Piller and Spring (660)
Stock Number 660 - Original Part Number 458613 - Reproduction - Retains CB Cover stock number 109 and 111, stainless steel.
Price: £10.85 (Excluding: VAT at 17.5%) |
|
|
 | Cable Nut (Acorn) (94)
Stock Number 94 - Original Part Number 410600 - Fits Pick-ups stock numbers 101, 102, 104, 106, 663 and CB Cover 109.
Price: £0.55 (Excluding: VAT at 17.5%) |
|
|
 | Cable Nut (flat) (95)
Stock number 95. Original part number 455791 - Reproduction - use as an alternative to stock number 96 on vertical pick-up stock number 106.
Price: £2.35 (Excluding: VAT at 17.5%) |
|
|
 | Cable Nut Split Washer (96)
Stock Number 96 - Original Part Number 455622 - Fits Pick-ups stock numbers 101, 102 104, 106, 663 and CB Cover 109.
Price: £0.40 (Excluding: VAT at 17.5%) |
|
|
| | Carbon Brush & Spring (47)
Stock Number 47 - Original Part Number 451260 - Fits Pick-ups stock number 101, 102, 104, 106, 663 and CB Covers 108 and 782
Price: £2.65 (Excluding: VAT at 17.5%) |
|
|
 | End Plate Shim K2F
Stock Number 175 - Original Part Number 458355 - Reproduction - Brass 0.003" thick.Stock Number 868 - Original Part Number 458356 - Reproduction - Brass 0.005" thick.
Price: £3.30 (Excluding: VAT at 17.5%)
|
Thickness: 0.003" 0.005" |
|
 | End Plate Shim K2FC
Stock Number 878 - Original Part Number 452906 - Reproduction - Brass - 0.003" thick.Stock Number 879 - Original Part Number 452907 - Reproduction - Brass - 0.005" thick.
Price: £3.30 (Excluding: VAT at 17.5%) |
Thickness: 0.003" 0.005" |
|
 | End Plate Bolts K2FC (661)
Stock Number 661 - Original Part Number 122163 - Reproduction - Stainless steel.
Price: £3.90 (Excluding: VAT at 17.5%) |
|
|
 | Oil Seal
Stock Number 114 - Original Part Number 459002 - Reproduction - 37mm Diameter, use with E18 bearing.Stock Number 30 - Original Part Number 459033 - Reproduction - 32mm Diameter, use with N3048 bearing.
Price: £5.55 (Excluding: VAT at 17.5%) |
Size: 37mm Dia 32mm Dia |
|
 | Control Parts Set (88)
Stock Number 88 - Original Part Number 458728 - Reproduction - Includes Spring, Plunger, Threaded Tube and Rubber Boot.
Price: £13.60 (Excluding: VAT at 17.5%) |
|
|
 | Control Cable (86)
Stock Number 86 - Reproduction - Cable outer 41" long.
Price: £15.00 (Excluding: VAT at 17.5%) |
|
|
 | Control Lever (940)
Stock Number 940 - Reproduction - Lefthand - 7/8" diameter handlebar.
Price: £10.55 (Excluding: VAT at 17.5%) |
|
|
 | Flange Gasket (634)
Stock Number 634 - Reproduction.
Price: £1.35 (Excluding: VAT at 17.5%) |
|
|
 | Specification Label (662)
Stock Number 662 - Reproduction - Black - Anticlockwise, includes screws. If you provide the data we will be pleased to stamp it on the label for you.
Price: £4.80 (Excluding: VAT at 17.5%) |
|
|
 | Cam Rings
Stock Number 117 - K1F Clockwise from drive end. Fits Vincent Comet. Auto advance Stock Number 119 - K2F Anticlockwise from drive end. Manual/Auto advance Others on request, please send details with order.
Price: £42.10 (Excluding: VAT at 17.5%) |
Stock Number: Stock No. 117 Stock No. 119 |
|
 | Magneto Bearing E15 (27)
Stock Number 27 - Original Part Number 189291 - New - Size 15mm x 35mm x 8mm - CB end.
Price: £15.20 (Excluding: VAT at 17.5%) |
|
|
 | Magneto Bearing N3048 (92)
Stock Number 92 - Original Part Number 189294 - New - Size 15mm x 37mm x 8 - Drive end.
Price: £22.35 (Excluding: VAT at 17.5%) |
|
|
 | Magneto Bearing E18 (340)
Stock Number 340 - Original Part Number 189244 - New - Size 18mm x 40mm x 9mm - Drive end.
Price: £17.40 (Excluding: VAT at 17.5%) |
|
|
 | Bearing Insulation Cups
Stock Number 29 - For E15 Bearing - 0.010" ThickStock Number 812 - For E15 Bearing - 0.013" Thick Stock Number 93 - For N3048 and E18 Bearing - 0.010" Thick Stock Number 813 - For N3048 and E18 Bearing - 0.013" Thick
Price: £0.55 (Excluding: VAT at 17.5%) |
Size: Stock No. 29 Stock No. 812 Stock No. 93 Stock No.813 |