| | |
 | Armature Overhaul (510)
Stock Number 510 - Includes bobbin rewind, new condenser and earth brush track skimmed if worn. Sliprings if required are extra. This is not an exchange service, you get your own armature back. Jobs are usually completed within six weeks, and carry a two year warranty. Send carefully wrapped and include payment and return address details. Sorry, this service is currently unavailable.
Price: £85.00 (Excluding: VAT at 17.5%) |
|
|
Bobbin Only Rewind (511)
Stock Number 511 - If you have the facilities to strip and reassemble the armature this provides a lower cost alternative to a full armature overhaul. This is not an exchange service, you get your own bobbin back. Jobs are usually completed within six weeks, and carry a two year warranty. Send carefully wrapped and include payment and return address details.Sorry, this service is currently unavailable.
Price: £68.00 (Excluding: VAT at 17.5%)
|  |
|
|
 | CB Points Spring (90)
Stock Number 90 - Original Part Number 470688 - Reproduction - Fitted in pairs to brass base plate type CB assy.
Price: £4.35 (Excluding: VAT at 17.5%) |
|
|
CB Points Centre Screw (656)
Stock Number 656 - Original Part Number 122160 - Reproduction - 45mm long.
Price: £2.85 (Excluding: VAT at 17.5%) |  |
|
|
 | Condenser (985)
Stock Number 985 - Original Part Number 454415 - Modern substitute, very high specification, zero failure - Comes with full fitting instructions.
Price: £12.45 (Excluding: VAT at 17.5%) |
|
|
Pick-up (46)
Stock Number 46 - Original Part number 487860 - New old stock - Carbon brush and springs not included.
Price: £13.60 (Excluding: VAT at 17.5%) |  |
|
|
 | Brush & Spring (47)
Stock Number 47 - Fits pick-up stock number 46 - 5mm diameter.
Price: £2.60 (Excluding: VAT at 17.5%) |
|
|
Earth Brush & Spring (48)
Stock Number 48 - Original Part Number 470537 - Fits contact breaker assembly base and earth brush holder - 6mm diameter, may need to be shortened.
Price: £4.25 (Excluding: VAT at 17.5%) |  |
|
|
 | Slipring (75)
Stock Number 75 - Original Part Number 454496 - Reproduction.
Price: £16.00 (Excluding: VAT at 17.5%) |
|
|
Rotor Arm (53)
Stock Number 53 - Original Part Number 487943 - New old stock - For use with jump gap distributor cap only - GJ4.
Price: £17.00 (Excluding: VAT at 17.5%) |  |
|
|
 | Distributor Cap (52)
Stock Number 52 - Original Part Number 490203 - New old stock - Jump gap - GJ4.
Price: £65.00 (Excluding: VAT at 17.5%) |
|
|
Half Speed Gear (54)
Stock Number 54 - Original Part Number 487832 - New old stock - Fibre - GJ4.
Price: £20.50 (Excluding: VAT at 17.5%) |  |
|
|
 | Brush & Spring, Rotor Arm (528)
Stock Number 528 - For use with carbon brush wipe rotor/distributor only. GA4
Price: £10.75 (Excluding: VAT at 17.5%) |
|
|
Magneto Bearing E15 (27)
Stock Number 27 - Original Part Number 189291 - New - Size 15mm x 35mm x 8mm - fitted to both drive and CB end.
Price: £14.75 (Excluding: VAT at 17.5%) |  |
|
|
 | Bearing Insulating Cups
Stock Number 29 - For E15 Bearing - 0.010" thickStock Number 812 - For E15 Bearing - 0.013" thick
Price: £0.50 (Excluding: VAT at 17.5%) |
Size: Stock Number 29 Stock Number 812 |