Independent Ignition Supplies

Independent Ignition Supplies - Specialist magneto coil rewinders and component suppliers

Online Catalogue : M-L Magneto Syndicate Ltd. : CK1, CK2 & CKV (Square)


Armature Overhaul (510) Stock Number 510 - Includes bobbin rewind, new condenser and earth brush track skimmed if worn. Sliprings if required are extra. This is not an exchange service, you get your own armature back. Jobs are usually completed within six weeks, and carry a two year warrantee. Print out the order form and send with armature. Sorry, this service is currently unavailable. Price: £85.00 (Excluding: VAT at 17.5%)


	Bobbin Only rewind (511) Stock Number 510 - If you have the facilities to strip and reassemble the armature this provides a lower cost alternative to full armature overhaul. This is not an exchange service, you get your own bobbin back. Jobs are usually completed within six weeks, and carry a two year warrantee. Print out the order form and send with your bobbin. Sorry, this service is currently unavailable. Price: £68.00 (Excluding: VAT at 17.5%)


Condenser (985) Stock Number 985 - Modern substitute - Comes with full fitting instructions. Price: £12.45 (Excluding: VAT at 17.5%)


	CB Points Spring (44) Stock Number 44 - Original Part Number 43B10 - Reproduction. Price: £3.10 (Excluding: VAT at 17.5%)


Slipring (123) Stock Number 123 - When fitting the hole in the armature drive plate must be enlarged in order to accomodate the slipring HT spout. Price: £16.00 (Excluding: VAT at 17.5%)


	Pick-up ('D' flange) (205) Stock Number 205 - Original Part Number 51P - Reproduction - Includes carbon brush & spring. Price: £13.65 (Excluding: VAT at 17.5%)


Pick-up (90 Degree) (810) Stock Number 810 - Original Part Number 9P - Reproduction. Price: £18.15 (Excluding: VAT at 17.5%)


	Pick-up Retaining Screw (670) Stock Number 670 - Reproduction - Zinc plated - Fits both 205 and 810 pick-ups. Price: £1.70 (Excluding: VAT at 17.5%)


Carbon Brush & Spring (47) Stock Number 47 - Original Part Number 60 - Fits pick-up stock number 205 and 810 - 5mm diameter. Price: £2.60 (Excluding: VAT at 17.5%)


	Earth Brush & Spring (48) Stock Number 48 - Original Part Number 1052 - Fits earth brush holder - 5mm diameter, may need to be shortened. Price: £4.25 (Excluding: VAT at 17.5%)


Contact Breaker Cover (1009) Stock Number 1009 - Original Part Number 7I - Reproduction - Provides engine stop facility. Price: £26.40 (Excluding: VAT at 17.5%)


	Bearing CB End (26) Stock Number 26 - Magneto bearing - type E13 - 13mm x 30mm x7mm - CB end. Price: £11.90 (Excluding: VAT at 17.5%)


Bearing Drive End (27) Stock Number 27 - Magneto bearing - type E15 - 15mm x 35mm x 8mm - drive end. Price: £14.75 (Excluding: VAT at 17.5%)


	Bearing Insulation Cup Stock Number 28 - For E13 Bearing - 0.010" thick Stock Number 811 - For E13 Bearing - 0.013" thick Stock Number 29 - For E15 Bearing - 0.010" thick Stock Number 812 - For E15 Bearing - 0.013" thick Price: £0.50 (Excluding: VAT at 17.5%)
	Stock Number: 28 811 29 812

Online Catalogue : M-L Magneto Syndicate Ltd. : CK1, CK2 & CKV (Square)

Independent Ignition Supplies - Specialist magneto coil rewinders and component suppliers